IP Camera Hub
Menu
Coming soon

Reolink E1 Pro

Indoor powered camera with a documented standalone stream route.

On this page

Does it fit your installation?

Worth checking for
An indoor pan-and-tilt position with continuous adapter power.
Look elsewhere for
An outdoor or PoE-only installation.

Reolink now advertises a 5 MP E1 Pro. Older 4 MP guides and specifications do not identify this version. Record the hardware identifier and configured codec before selecting a stream or copying an older setup.

Documented model facts

Connection
RTSP and ONVIF documentedManufacturer source ↗
Current advertised resolution
5 MP, 2880 × 1616Manufacturer source ↗
Network
2.4 GHz and 5 GHz Wi-FiManufacturer source ↗
Power
Continuous DC adapter; no PoEManufacturer source ↗
Video codec
Not establishedManufacturer source ↗
Already own it? Set it up ↗Compare local viewing choices ↗

Check the exact hardware before buying

The captured current product body does not establish a video codec. Do not borrow H.264 from an older E1 Pro specification. The base E1 has a different direct-stream condition; the manufacturer protocol matrix explicitly distinguishes E1 Pro.

Purchase and version checklist

Match the model, region and hardware revision in the seller listing with the camera label and official documents. Check the included power supply, mounting parts, storage and return conditions. No current buying link is qualified for this model.

Keep the camera hardware identifier and firmware in your setup notes. If the supplied version differs from the inspected source, check that version before copying its stream or power settings. An accessory or storage service can have separate requirements.

IP Camera Hub editorial · Model source dates shown below · US source scope

Sources and limits

Sources (3 documents)
CameraViewer product team: CameraViewer development brief

Owner-supplied brief · App behavior not independently tested

Publication date: Not stated · Development brief

Simulator captures demonstrate manual RTSP setup, decoded H.264 fixture video, saving a camera and full-screen viewing.

Owner-supplied brief; screenshots have not been independently examined here. Test media demonstrates app behavior, not physical-camera compatibility.

Read the source ↗
Reolink: reolink e1 pro documentation

Selected documentation claims reviewed 2026-10-14

Publication date: Not stated · Manufacturer or standards documentation

It does not support PoE.

Selected model, version and configuration only. Manufacturer claims do not establish CameraViewer hardware playback, controls or recordings.

Read the source ↗
Reolink: reolink protocols documentation

Selected documentation claims reviewed 2026-10-14

Publication date: Not stated · Manufacturer or standards documentation

Must connect to Reolink Home Hub

Selected model, version and configuration only. Manufacturer claims do not establish CameraViewer hardware playback, controls or recordings.

Read the source ↗