IP Camera HubCAMERA RESOURCE
IP camera compatibility: documented versus tested
Compatibility starts with a documented camera endpoint and a reachable network. It ends with a test on the exact camera, firmware and app version.
No physical-camera compatibility is confirmed for the app yet. Current app demonstrations use H.264 fixture video in the simulator.
Exact models before an app test
These documented candidates still need physical-camera tests. A model fact is not an app compatibility verdict.
Tapo C120: local streams, power and setup evidence
Check Tapo C120 local viewing documentation, power and setup limits. Match the exact hardware before buying; CameraViewer physical-camera tests remain pending.
Read more ↗Tapo C210: local streams, power and setup evidence
Check Tapo C210 local viewing documentation, power and setup limits. Match the exact hardware before buying; CameraViewer physical-camera tests remain pending.
Read more ↗Tapo C225: local streams, power and setup evidence
Check Tapo C225 local viewing documentation, power and setup limits. Match the exact hardware before buying; CameraViewer physical-camera tests remain pending.
Read more ↗Reolink RLC-520A: local streams, power and setup evidence
Check Reolink RLC-520A local viewing, power and setup limits. Match the exact hardware before buying; CameraViewer physical-camera tests are still pending.
Read more ↗Check these four details first
- Find the camera’s exact model and firmware.
- Confirm RTSP, ONVIF or an HTTP image endpoint in its official documentation.
- Record the stream codec, configured port and camera account.
- Check reachability from your iPhone or iPad on the intended network.
Manufacturer documentation, side by side
| Manufacturer | Documented route | Documentation status | Model and service scope | App-tested |
|---|---|---|---|---|
| Amcrest | RTSP | Manufacturer-documented route | Amcrest IP cameras covered by the RTSP support recipe; identify whether the target is a camera or recorder. | Not tested |
| ANNKE | RTSP | Manufacturer-documented route | ANNKE Vision DVR/NVR models on the support article list, including DT81DP, N48PI and H800. | Not tested |
| Anpviz | ONVIF | Manufacturer-documented route | The US H Series PTZIP204WX4IR-SU-US product listing documents ONVIF support. | Not tested |
| Arlo | RTSP | Restricted access | Arlo documents RTSP service use for VMB5000 and VMB4540 SmartHubs, including internal and local streaming. | Not tested |
| Axis | RTSP, MJPEG, JPEG, ONVIF | Manufacturer-documented route | VAPIX streaming interfaces on devices that expose the documented API, plus model-specific ONVIF account instructions. | Not tested |
| Blink | Unconfirmed | Endpoint unconfirmed | Blink documents Live View through its app and selected Alexa devices. A direct local endpoint remains unconfirmed. | Not tested |
| Bosch | RTSP | Manufacturer-documented route | Bosch IP video products covered by the 2022-12 guidebook expose configurable RTSP services. | Not tested |
| D-Link | RTSP | Manufacturer-documented route | DCS-3110 revision A manual documents RTSP viewing with configurable access names. | Not tested |
| Dahua | RTSP | Manufacturer-documented route | Network cameras covered by the Web 3.0 manual; confirm the model and firmware before using its RTSP format. | Not tested |
| Eufy | RTSP | Restricted access | The eufyCam/HomeBase NAS workflow documents RTSP under camera storage settings. | Not tested |
| EZVIZ | ONVIF | Manufacturer-documented route | EZVIZ lists ONVIF for specific camera variants, including CS-H8c-R100-1K2WKFL from V5.3.8 build 230829. | Not tested |
| Foscam | RTSP | Manufacturer-documented route | Foscam HD-camera RTSP instructions distinguish videoMain, videoSub and an audio-only endpoint. | Not tested |
| Google Nest | RTSP, WebRTC | Restricted access | Google Device Access documents API-generated RTSP or WebRTC streams according to the camera and its Nest/Home app state. | Not tested |
| Hanwha Wisenet | RTSP | Manufacturer-documented route | Hanwha Vision documents profile-based RTSP camera URLs and separate multi-sensor and recorder formats. | Not tested |
| Hikvision | RTSP, ONVIF | Manufacturer-documented route | Device stream channel conventions and firmware-specific ONVIF account settings described by Hikvision support. | Not tested |
| Imou | ONVIF | Manufacturer-documented route | The North American Rex specification lists ONVIF. This evidence applies to that product listing. | Not tested |
| Lorex | RTSP | Manufacturer-documented route | Certain Lorex DVRs, NVRs and IP cameras described by the manufacturer RTSP article. | Not tested |
| Milesight | RTSP | Manufacturer-documented route | Milesight network-camera manual documents main, sub and third RTSP stream paths. | Not tested |
| Reolink | RTSP, ONVIF | Manufacturer-documented route | Standalone and Hub/NVR-connected devices in Reolink’s protocol matrix. Support depends on model, power and connection route. | Not tested |
| Ring | Unconfirmed | Endpoint unconfirmed | Ring Edge documentation covers adding third-party ONVIF cameras to Ring Alarm Pro; direct export from Ring cameras remains unconfirmed. | Not tested |
| Sricam | RTSP, ONVIF | Manufacturer-documented route | Sricam publishes a local ONVIF-client tutorial with two alternative RTSP endpoint formats. | Not tested |
| TP-Link Tapo | RTSP, ONVIF Profile S | Manufacturer-documented route | Tapo models covered by TP-Link’s RTSP/ONVIF instructions, with battery and doorbell exceptions. | Not tested |
| TP-Link VIGI | RTSP | Manufacturer-documented route | VIGI cameras covered by TP-Link FAQ 3718, with separate high- and low-quality RTSP streams. | Not tested |
| TRENDnet | RTSP | Manufacturer-documented route | TV-IP572P and TV-IP572PI profile settings list RTSP access names for separate video profiles. | Not tested |
| Ubiquiti UniFi Protect | RTSP, RTSPS | Restricted access | UniFi Protect documents outgoing RTSPS and RTSP services on its Protect system. | Not tested |
| Uniview | RTSP | Manufacturer-documented route | Uniview V1.1 URL reference distinguishes common IP cameras from fisheye, dual-lens and recorder streams. | Not tested |
| VIVOTEK | RTSP | Manufacturer-documented route | SD81x1 cameras covered by the cited manual, with configurable RTSP access names. | Not tested |
| Wyze | RTSP | Restricted access | Legacy RTSP firmware for Wyze Cam v2, v3 and original Pan; official pages retain conflicting download instructions, so availability remains unknown. | Not tested |
| YI / Kami | Unconfirmed | Endpoint unconfirmed | The official manual index separates Kami Indoor, Outdoor, Wire-Free and other camera families; direct protocol support remains unconfirmed. | Not tested |
Capabilities need separate tests
Discovery, live video, audio, pan/tilt/zoom controls and recording playback are separate features. A working stream in another viewer does not confirm that all of them work here.
Axis RTSP setup: H.264 URLs, profiles and accounts
Prepare an Axis RTSP stream with the documented VAPIX path, check device-specific codecs and profiles, and separate RTSP from ONVIF accounts.
Read more ↗
Hikvision RTSP setup: channel paths and camera accounts
Build a Hikvision RTSP URL using the configured port and channel, then check stream settings and firmware-specific ONVIF account requirements.
Read more ↗
Reolink RTSP setup: ports, streams and model limits
Find the right Reolink RTSP address, check Home Hub and NVR requirements, and choose a documented H.264 stream before trying a camera viewer.
Read more ↗
Tapo RTSP setup: camera accounts and stream URLs
Set up a Tapo camera account, choose the right RTSP stream, and check battery, doorbell and codec limits before trying CameraViewer.
Read more ↗Sources and limits
CameraViewer development briefCameraViewer product team · Owner-supplied brief · App behavior not independently tested
Publication date: Not stated · Development brief
Simulator captures demonstrate manual RTSP setup, decoded H.264 fixture video, saving a camera and full-screen viewing.
Owner-supplied brief; screenshots have not been independently examined here. Test media demonstrates app behavior, not physical-camera compatibility.
Read the source ↗Conformant ProductsONVIF · Selected documentation claims reviewed 2026-10-02
Publication date: Not stated · Manufacturer or standards documentation
Conformance is tied to a product’s specific firmware/software version
Official conformance records require model and version matching. No camera-specific lookup or app test is asserted here.
Read the source ↗Prelaunch content. Manufacturer protocol documentation and app test evidence describe different things.